Curving new asphalt driveway through a front yard. PavePro, asphalt driveway paving contractor serving Clinton, MS.
Licensed · Insured · Family-Owned Mississippi Business

Expert Asphalt Driveway Paving in Clinton, MS

Asphalt Driveways · Clinton, MS

Free asphalt driveways quotes in Clinton, MS. No pressure, no runaround.

Get a free estimate → Call (601) 401-4964
FAMILY
Owner-operated, MS-built
FREE
No-pressure quotes
100%
Licensed & insured
§ 02 · The work

Asphalt driveway paving
in Clinton.

New installs and full re-paves on a compacted base. 20 to 30 years with upkeep.

We pave driveways for homeowners in Clinton and across Hinds County, including Olde Towne, Traceland, Lakewood, and Northside. Crews come from our Madison and Jackson locations and work by appointment at your home.

Cost Effective

Asphalt driveways cost far less than concrete, so you get a high-quality surface on a reasonable budget.

Long-Lasting and Durable

A properly installed asphalt driveway typically lasts 20 to 30 years with crack filling and sealcoating.

Fast Installation

Most driveways are paved in 1 to 2 days, and cars can drive on them in about 24 hours.

Easy to Repair

Small cracks seal up quickly and resurfacing costs a fraction of full replacement.

typical thickness3 inches laid, 2.5 inches compacted
base materialCompacted crushed limestone
cure timeCars in about 24 hours, heavy trucks in 48 to 72 hours, full structural cure 6 to 12 months

How we do it

What moves the price

Paving in Clinton

Asphalt driveway paving for Clinton homeowners

The crews that pave office, school, and church lots around Clinton also pave driveways for homeowners. Same equipment, same standards, and no subcontractors. Every driveway gets the same steps, whatever its size. We never sub out paving, so the company that quotes your driveway is the company that builds it.

A driveway is only as good as what sits under it. The old surface comes out where it has to, soft spots are dug out, and a compacted crushed limestone base goes down. That base is graded so rain runs off the drive instead of sitting on it and working its way underneath. If the old driveway is still sound, we may pave over it instead, and the quote says which.

Then 3 inches of hot asphalt are laid and rolled to 2.5 inches compacted. The edges get compacted along with the middle, since a loose edge is where a driveway tends to start breaking. Most driveways are paved in 1 to 2 days, and cars can usually go on in about 24 hours.

Long new asphalt driveway leading up to a ranch house. PavePro, asphalt driveway paving contractor serving Clinton, MS.
Long new asphalt driveway leading up to a ranch house
Skid steer tearing out an old asphalt driveway. PavePro, asphalt driveway paving contractor serving Clinton, MS.

Tear-out where needed

When an old driveway is too far gone to pave over, it comes out. We tell you at the quote whether yours needs a tear-out or a new layer on top.

Driveway repair
Old driveway graded down to base before repaving. PavePro, asphalt driveway paving contractor serving Clinton, MS.

Base work

Soft spots are dug out and replaced. Crushed limestone is spread, compacted, and graded so rain drains off the driveway instead of soaking into the ground underneath it.

Driveway paving
Roller finishing a new driveway along a wooden fence. PavePro, asphalt driveway paving contractor serving Clinton, MS.

Rolled tight

The roller compacts 3 inches of asphalt down to 2.5 inches, all the way out to the edges along fences, walks, and the garage apron, so the whole surface is packed tight.

PavePro in Clinton

The first year on a new Clinton asphalt driveway

New asphalt is ready for cars in about 24 hours, but it keeps curing for 6 to 12 months. During that stretch the surface is softer than it will be later. Avoid turning your wheels while the car is sitting still, because that can scuff the top and leave marks. The marks are not a defect, but they are easy to avoid.

Heavy trucks need more time. If a moving truck, a load of building supplies, or a camper is on the way, give the driveway 48 to 72 hours before anything that heavy rolls onto it. It is worth planning big deliveries around paving day. Everyday cars can use it the whole time.

After the 6 to 12 month cure, the driveway is ready for its first sealcoat. We put down two coats, with any cracks filled first, then reseal every 1 to 2 years. With that upkeep, an asphalt driveway lasts 20 to 30 years. See sealcoating in Clinton for how that visit works. Skip the sealcoat and the surface dries out and cracks sooner.

New asphalt driveway between shade trees leading up to a home. PavePro, asphalt driveway paving contractor serving Clinton, MS.
New asphalt driveway between shade trees leading up to a home
Curving asphalt driveway shaded by oak trees. PavePro, asphalt driveway paving contractor serving Clinton, MS.

Day one

Cars can usually go on in about 24 hours. Until the asphalt cures, try to turn the steering wheel only while the car is rolling. That keeps the surface smooth.

About driveway paving
Fresh asphalt driveway through a shaded stand of trees. PavePro, asphalt driveway paving contractor serving Clinton, MS.

Heavy loads

Trucks, trailers, and heavy deliveries wait 48 to 72 hours. Schedule anything that heavy for after that window, not the morning after paving. Cars are fine in the meantime.

PavePro in Clinton
Fresh asphalt driveway curving into the shade of the trees. PavePro, asphalt driveway paving contractor serving Clinton, MS.

First sealcoat

Two coats once the driveway has cured 6 to 12 months, then every 1 to 2 years. Cracks get filled before each sealcoat goes on. It can usually be quoted from photos.

Sealcoating in Clinton

Clinton asphalt driveway, from quote to paving day

We come out to your home by appointment, look at the old surface, the drainage, and how cars use the driveway, and where it meets the street and the garage, then send a free written quote, often the same day. There are no prices over the phone, because two driveways the same size can need very different work.

The quote has a line item for each service, each with its own scope. If the job includes a tear-out, base repair, and new asphalt, each one shows up on its own line, so you can see what the driveway is getting. Nothing is bundled into one number you can't read.

Once the quote is approved and the deposit is in, most driveways are scheduled within 2 to 3 weeks, and we plan the work around your hours where we can. Paving itself usually takes 1 to 2 days, and you can usually drive on it in about 24 hours. Thinking about concrete instead? We pour concrete driveways in Clinton with our own crews too.

Aerial view of a roller finishing a new driveway across a wide lawn. PavePro, asphalt driveway paving contractor serving Clinton, MS.
Aerial view of a roller finishing a new driveway across a wide lawn

Three steps to a new driveway

  1. 01

    Visit

    We meet you at the house, walk the driveway, and look at the base, the edges, and where water goes when it rains.

  2. 02

    Written quote

    A free written quote, often the same day, with a line item for each service and its own scope.

  3. 03

    Paving

    Scheduled within 2 to 3 weeks of the deposit. Paving usually takes 1 to 2 days, and cars go on in about 24 hours.

§ 03 · Recent work

Jobs we've put down.

Real job photos from PavePro crews. No stock photos.

Freshly paved asphalt driveway. PavePro, asphalt driveway paving contractor serving Clinton, MS. Asphalt Driveways Freshly paved asphalt driveway New asphalt driveway with clean edges. PavePro, asphalt driveway paving contractor serving Clinton, MS. Asphalt Driveways New asphalt driveway with clean edges Crew striping a lot with a walk-behind line striper. PavePro, asphalt driveway paving contractor serving Clinton, MS. Parking Lot Striping Crew striping a lot with a walk-behind line striper Ride-on sealcoater coating a parking lot. PavePro, asphalt driveway paving contractor serving Clinton, MS. Sealcoating Ride-on sealcoater coating a parking lot Crew painting yellow crosshatch stripes. PavePro, asphalt driveway paving contractor serving Clinton, MS. Parking Lot Striping Crew painting yellow crosshatch stripes Finishers working a fresh concrete driveway. PavePro, asphalt driveway paving contractor serving Clinton, MS. Concrete Driveways Finishers working a fresh concrete driveway
§ 04 · FAQ

Straight answers on Asphalt Driveways.

Q · 01 Do you pave driveways in Clinton neighborhoods like Olde Towne and Traceland?
+

Yes. We pave driveways across Clinton, including Olde Towne, Traceland, Lakewood, and Northside, and throughout Hinds County. Crews come from our Madison and Jackson locations.

Q · 02 How soon can I drive on my new Clinton driveway?
+

Cars can usually go on in about 24 hours. Heavy trucks and trailers should wait 48 to 72 hours.

Q · 03 Why does new asphalt scuff when I turn my wheels?
+

New asphalt cures for 6 to 12 months and is softer during that time. Turning the wheels while the car is not moving can scuff it, so turn only while rolling.

Q · 04 How thick is the asphalt on a driveway?
+

We lay 3 inches of asphalt and roll it to 2.5 inches compacted, over a compacted crushed limestone base.

Q · 05 Who does the work on my driveway?
+

Our own crews. We never sub out paving.

Q · 06 When will my driveway be scheduled?
+

Most driveways are scheduled within 2 to 3 weeks of the deposit. Paving usually takes 1 to 2 days.

Q · 07 Can you work around my schedule?
+

We plan the work around your hours where we can. Every job is done by appointment at your home.

Q · 08 How long will my asphalt driveway last?
+

With proper care, you are looking at 20 to 30 years of use. Sealcoating every 1 to 2 years and repairing cracks as they appear makes all the difference.

Q · 09 Is asphalt a better choice than concrete?
+

Asphalt is usually more affordable, faster to install, and easier to repair. Concrete lasts longer but costs a lot more up front.

Q · 10 What is the cost of an asphalt driveway?
+

It depends on the size, what is there now, and how much base work the driveway needs. We do not quote prices on the phone or on the spot; we look at the site and send a free written quote.

Read all FAQs →

§ 06 · Free estimate
Let's pave
something.

Tell us about the job and we'll send a written, itemized quote. No pressure, no runaround.

Phones and quote requests open 24/7. After hours we take your message and call you back the next business morning.
Step 1 · You
Step 2 · Work
Step 3 · Property
Step 4 · Timeline
Get your free quote
Where's the property?
When do you want this done?
SUMMARY → property · services · timeline
Call Now Get a Free Quote