Finisher floating a fresh concrete driveway by a garage. PavePro, concrete driveway contractor serving Richland, MS.
Licensed · Insured · Family-Owned Mississippi Business

Expert Concrete Driveway Installation in Richland, MS

Concrete Driveways · Richland, MS

Free concrete driveways quotes in Richland, MS. No pressure, no runaround.

Get a free estimate → Call (601) 401-4964
FAMILY
Owner-operated, MS-built
FREE
No-pressure quotes
100%
Licensed & insured
§ 02 · The work

Concrete driveways
in Richland.

New installs and replacements, finished clean. Built for 30+ years.

We pour concrete driveways, approaches, and slabs in Richland and across Rankin County, including Richland Heights and Metes and Bounds, with crews coming from our Madison and Jackson locations.

Durability That Lasts

A properly installed concrete driveway lasts 30 years or more.

Low Maintenance

Concrete doesn't need the sealcoating cycle that asphalt does.

Built to Carry Weight

Rebar and a compacted base, spec'd per job, carry cars and trucks once the slab has cured.

Clean, Durable Finish

A smooth broom finish gives you traction and curb appeal on a surface built to last.

typical thicknessSpec'd per job
base materialCompacted aggregate base
cure timeWalk on in 24 hours, drive on in 7 days, full cure 28 days

How we do it

What moves the price

Paving in Richland

Concrete driveways in Richland, MS

A concrete driveway is built before the concrete truck shows up. We look at how the driveway meets the street and the garage and where water will run off. Then we set the forms, build and compact the base, and place rebar so the slab holds together. Thickness is spec'd for what you park on it, so a driveway that carries a work truck or a trailer is planned for that load from the start.

Then the concrete is poured, spread, and finished. We cut control joints into the slab so that if it cracks, the crack runs in the joint where we put it. The surface gets a clean broom finish for traction when it is wet.

Concrete costs more up front than asphalt, and it can last 30 years or more. Our own employees pour and finish it, and we never sub it out. If you are weighing the two, see how we build an asphalt driveway in Richland. We can quote both.

New concrete driveway curing in front of a garage. PavePro, concrete driveway contractor serving Richland, MS.
New concrete driveway curing in front of a garage
Crew spreading concrete over driveway mesh. PavePro, concrete driveway contractor serving Richland, MS.

Reinforcement in place

Reinforcement is set on the compacted base before the pour, then the crew spreads concrete over it so it ends up inside the slab.

Concrete driveways
Finishers working a fresh concrete driveway. PavePro, concrete driveway contractor serving Richland, MS.

Finished by hand

Finishers work the surface while it is still workable, then control joints are cut so any cracking follows a straight, planned line.

Concrete services
Finished broom-finish concrete driveway. PavePro, concrete driveway contractor serving Richland, MS.

Broom finish

A clean broom finish gives tires and shoes grip on a wet driveway. It is the finish we put on the driveways we pour.

Paving in Richland

Concrete approaches and slabs for Richland businesses

Some parts of a commercial site carry weight in one place, day after day. An approach where loaded trucks turn in, a pad where a trailer or a dumpster sits, or a slab under equipment all take that kind of load. Concrete is often worth pricing for those spots.

We build them the same way as a driveway, with a compacted base, rebar, and cut joints, and the thickness is spec'd for what will sit on it or drive across it. Outside, the slab gets a broom finish for traction. Our own employees pour it, and the same company can pave the asphalt around it, so the concrete and the lot are planned together.

New concrete takes time before it carries weight. You can walk on it after 24 hours and drive on it after about 7 days, and it reaches full cure at 28 days. Keep heavy trucks off it until then, and set the pour date for a time the site can work around it.

Fresh concrete floor running down a warehouse aisle. PavePro, concrete driveway contractor serving Richland, MS.
Fresh concrete floor running down a warehouse aisle
Concrete truck pumping into a residential driveway form. PavePro, concrete driveway contractor serving Richland, MS.

Pumped into the forms

On a bigger pour, concrete is pumped into the forms so the crew can place and finish each section while it is still workable.

Concrete contractor
Finished section of a new concrete warehouse floor. PavePro, concrete driveway contractor serving Richland, MS.

Slabs and floors

Our employees pour warehouse floors and slabs too. The base, the reinforcement, and the cut joints follow the same rules as a driveway.

Industrial paving
Concrete crew working fresh concrete into a driveway form. PavePro, concrete driveway contractor serving Richland, MS.

Concrete next to asphalt

When a site has both, one company plans the concrete and the asphalt together, so the approach and the lot meet where they should.

Parking lots in Richland

Pouring a Richland concrete driveway, step by step

Concrete is quoted after we see the site. We come out by appointment, look at what is there now, how it drains, and what you plan to park or drive on it, then send a free written quote, often the same day. The quote has a line item for each service, each with its own scope, so taking out an old driveway and pouring the new one are listed separately. We don't give prices over the phone.

Most jobs are scheduled within 2 to 3 weeks of the deposit. By the day of the pour, the forms, base, and rebar are already set, and the crew places and finishes the concrete. Before the pour, we go over the layout with you, including where the control joints will run.

After that, the concrete needs time. Stay off it for the first 24 hours, keep vehicles off for about 7 days, and give it 28 days to reach full cure before it carries heavy loads.

Crew raking concrete into a driveway form. PavePro, concrete driveway contractor serving Richland, MS.
Crew raking concrete into a driveway form

How a Richland concrete pour runs

  1. 01

    Forms and base

    Forms are set, the base is graded and compacted, and rebar goes in before the concrete arrives.

  2. 02

    Pour and finish

    The concrete is placed, finished, and broomed, and control joints are cut into the slab.

  3. 03

    Cure

    Walk on it at 24 hours, drive on it at about 7 days, full cure at 28 days.

§ 03 · Recent work

Jobs we've put down.

Real job photos from PavePro crews. No stock photos.

Concrete driveway pour at a home. PavePro, concrete driveway contractor serving Richland, MS. Concrete Driveways Concrete driveway pour at a home Crew pouring a concrete driveway. PavePro, concrete driveway contractor serving Richland, MS. Concrete Driveways Crew pouring a concrete driveway Milled lot stretching toward the I-55 frontage road. PavePro, concrete driveway contractor serving Richland, MS. Milling & Reclamation Milled lot stretching toward the I-55 frontage road Crew cleaning a milled edge along the curb. PavePro, concrete driveway contractor serving Richland, MS. Milling & Reclamation Crew cleaning a milled edge along the curb Skid steer planer milling the lot edge at a curb. PavePro, concrete driveway contractor serving Richland, MS. Milling & Reclamation Skid steer planer milling the lot edge at a curb Skid steer planer milling around bollards. PavePro, concrete driveway contractor serving Richland, MS. Milling & Reclamation Skid steer planer milling around bollards
§ 04 · FAQ

Straight answers on Concrete Driveways.

Q · 01 How thick do you pour a concrete driveway for a work truck?
+

Thickness is spec'd for what you park on it. Tell us about the truck, trailer, or equipment, and the quote is written for that load.

Q · 02 Do you put rebar in a concrete driveway?
+

Yes. Rebar goes in on top of a compacted base before the pour, and control joints are cut after.

Q · 03 What are the lines cut into new concrete?
+

Those are control joints. They give the slab a planned place to crack, so any cracking runs in a straight line in the joint.

Q · 04 Can you pour a concrete approach for our business?
+

Yes. Approaches, pads, and slabs get the same compacted base, rebar, and cut joints, with the thickness spec'd for the traffic.

Q · 05 How long does a concrete driveway last in Richland?
+

A well-built concrete driveway can last 30 years or more.

Q · 06 What finish do you put on a concrete driveway?
+

A clean broom finish. It gives traction when the driveway is wet.

Q · 07 Who pours the concrete?
+

Our own employees. PavePro does concrete in-house and never subs it out.

Q · 08 Is a concrete driveway more expensive than asphalt?
+

Yes, concrete costs more up front. It makes up some of that with very little upkeep, while asphalt needs sealcoating every 1 to 2 years. We can quote both so you can compare.

Q · 09 Do you remove my old driveway?
+

Yes. We break out the old concrete or asphalt, haul it away, and regrade before we pour the new driveway.

Q · 10 When can I park in my garage again?
+

You can drive on a new concrete driveway in about 7 days. Keep heavy trucks and trailers off it until it fully cures at 28 days.

Read all FAQs →

§ 06 · Free estimate
Let's pave
something.

Tell us about the job and we'll send a written, itemized quote. No pressure, no runaround.

Phones and quote requests open 24/7. After hours we take your message and call you back the next business morning.
Step 1 · You
Step 2 · Work
Step 3 · Property
Step 4 · Timeline
Get your free quote
Where's the property?
When do you want this done?
SUMMARY → property · services · timeline
Call Now Get a Free Quote